Amiga A600 PiggyBackNot V3 RGB2HDMI
Amiga A600 PiggyBackNot RGB2HDMI 1Mb Expansion
Amiga A600 PiggyBackNot V3 is an Amiga 600 trapdoor expansion that adds 1Mb Chip Ram and also integrates a RGB2HDMI circuit that then allows you to add a Raspberry Pi Zero (not included). The benefit of this upgrade is that it allows you to add a selection of upgrades that plug over the 68000 CPU, for example the 8Mb Mini Fast Ram card the xT 28Mhz, 11Mb Accelerator or the awesome A630 68030, 64Mb accelerator. So you can have HDMI output and the extra fast ram or accelerator in a very tidy package. Specifications:
  • 1MB additional CHIP RAM
  • Implemented RGB2HDMI logics in small CPLD
  • RPI Zero connector
  • Integrated denise adapter on flex ffc cable.
  • RTC Socket (Add a Real Time Clock Chip
  • 3 x Clockports
  • Flexible mHDMI to HDMI FFC cable included!
  Benefits:
  • Slim construction, No need to remove the trapdoor cover or replace with one that allows the expansion
  • Module does not interfere with fast ram cards or accelerator cards.
Not included:
  • Raspberry Pi
  • SD Card
  • 3D Printed HDMI Mount
    1 Year RTB Warranty.   A600 PiggyBackNot PCB Colour will vary, Raspberry Pi Zero NOT included.    
 £ 66.66 Excl. VAT Select options
Refurbished Amiga A600
Refurbished Commodore Amiga 600 Unit

Commodore Amiga 600 – Professionally refurbished

Technical Specifications
  • Motorola 68000 (7.14Mhz) CPU
  • 1Mb Chip Ram
  • 2.04 Kickstart Roms
  • 3.5" Floppy Drive
  • UK Layout Keyboard
What’s included?
  • Professionally refurbished Amiga 600 Unit (excluding mouse and PSU), these are options that can be added.
  What is Refurbished? Each Commodore Amiga 600 mainboard is professionally recapped (standard or Polymer is avilable at extra cost) and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 600 worked as it did when it first came from the factory back in the 1990’s. Case and keyboard is stripped and cleaned but due to age may show signs of use and age.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results and the process: [kad_youtube url="https://youtu.be/m4mbKPySfLE" ]   [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption] Want up add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.   Shipping UK shipping will be via Parcelforce and shipping cost will be calculated the checkout. Worldwide shipping available simply contact us for a shipping quote.   Ordering We only ask for a deposit and the rest upon completion.    

Images of the Amiga 600 is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 600 we have please contact us.

 
 £ 329.99 Excl. VAT Select options
xT Accelerator for Amiga 600
xT Accelerator Amiga 600, 28Mhz CPU, 11MB Fastram
xT Accelerator Amiga 600 with an onboard 28Mhz CPU with 11MB Fastram is one of the smallest and slimmest accelerator cards for the Amiga 600 computer, with some extra skill you can also fit the original HDD sled to it.The card is mounted on top of the MC68000 PLCC68 processor. All configuration options are available in the CLI.   Full specs:
  • CPU MC68SEC000AA20, clocked on 28MHz.
  • 11MB Fast Ram.
  • MapROM Feature.
  • PCMCIA Friendly - Ram needs to be set to 4MB.
  • Embedded hardware DriveSWAP DF0/DF1 (Boot Selector).
 
Notes:
  • Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
  • The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1.
  • PCB Colour will vary
*2Mb Chip ram is strongly recommended for WHDLoad which is available here    
 £ 79.16 Excl. VAT Read more
A630 Accelerator Turbo Card A600
A630 Accelerator Turbo Card A600
A630 Accelerator Turbo Card for the Amiga 600 is a modern turbo card with the classic 68030 Motorola processor running at 50Mhz. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost! PRODUCT END OF LIFE: Now superseded by the REV 3 version here   Full specs:
  • CPU MC68030, clocked on 50MHz.
  • 64MB SDRAM Fast Ram.
  • Cooling: Passive or Active. No heatsink or fan is included, options are below.
  • PCMCIA Friendly.
 
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2 or 3.2.1  Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.  
Notes:
  • Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
  • The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
  *2Mb Chip ram is strongly recommended for WHDLoad which is available here   We also sell a version without a CPU (add your own) A630 Rev 2 No CPU   PRODUCT END OF LIFE: Now superseded by the REV 3 version here            
Read more
Amiga PSU DUO Amiga A500-600-1200 and CD32
Commodore Amiga PSU for 2 x A500/600/1200 (DUO EDITION)
Commodore Amiga PSU DUO EDITION for 2 x A500/A600/A1200, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200. The new Amiga PSU DUO Edition is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or TF536 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • 2  x A500 A500+ A600 A1200 compatible (rectangular 5pin DIN plug)
  • Stabilized, double protected +5VDC up to 8.0A rated output (total, 4A per channel max)
  • Stabilized +12VDC up to 1.2A rated output (0.6A per channel max)
  • Stabilized -12VDC up to 0.15A rated output
  • Trim potentiometer for 5VDC fine adjustments (5-5.5V range) common for both outputs
  • Double over current protection, individual for each output
  • Durable main AC power On/Off switch
  • Set of LED status indicators (green 5VDC, yellow 12VDC, blue -12VDC)
  • Eco friendly design: consumes ~20% less power compared to original PSU set
  • Configurable set of detachable output cables. Versions for regular Amiga 500/600/1200 or CD32/A590 are available (1.6 m length)
  • Detachable input AC cable allowing you to use your own desired cable length (cable included)
  • Weight only 0.3 KG
  • Universal AC input range to support all worldwide power standards (accepts 110-240 VAC)
  • Meets safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
Checkout Ravi Abbot Review: [kad_youtube url="https://youtu.be/lqZuQ2S5TL4" ]    
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
 £ 74.99 Excl. VAT Add to basket
A630 Rev 3 Amiga 600 Accelerator
A630 Rev 3 Accelerator 68030 50Mhz inc FPU Amiga A600
A630 Rev 3 Accelerator for the Amiga 600 is the latest revision of the A630 modern turbo card with the classic 68030 Motorola processor running at 50Mhz and also includes an onboard FPU. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit. Full specs:
  • CPU MC68030, clocked on 50MHz.
  • FPU 68882FN40 - synchronous or asynchronous clocking.
  • 64MB SDRAM Fast Ram.
  • Cooling: Active included.
  • PCMCIA Friendly.
 
Important Information:
 
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2   Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.  
Notes:
  • Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
  • The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be  purchased below.
  • An internal HDD/CF/SD Card needs to be installed for the A630 to boot.
  • PCB Colour will vary.
  *2Mb Chip ram is strongly recommended for WHDLoad which is available here    
 £ 183.33 Excl. VAT Add to basket
Amiga Capacitor Kit A1200 A600 CD32
Amiga A600 Capacitor Kit Polymer (Premium)
Amiga A600 Capacitor Kit Polymer (Premium). Polymer capacitors compared to the 'standard' liquid electrolyte capacitors, organic polymer is a solid electrolyte, so these capacitors will never leak. These types are still within the Commodore specification compared to other type of capacitors that are used like tantalum or polymer tantalums which should be avoided. We only use quality capacitors and use these in our own Amiga A600 premium recapping service.
  • Complete set of capacitors for Amiga 600 mainboard
  • Compatible with both PAL and NTSC models
  • Compatible with 1.1,1.3, 1.5 and 2B revisions

Package includes:

  • Full set of SMD and through hole capacitors.
  It is assumed the right tools and techniques are used in replacing capacitors as we cannot accept any responsibility for any damage to your board using our Amiga A600 Capacitor Kit. If your an sure we offer a range of Amiga recapping services including fixs and ultrasonic cleaning, contact us for any further information or search Amiga recapping services   Image for illustration only    
 £ 16.66 Excl. VAT Add to basket
Commodore Amiga PSU Duo Plus
Commodore Amiga PSU for 2 x A500/600/1200 (DUO PLUS)
Commodore Amiga PSU DUO EDITION PLUS for 2 x A500/A600/A1200 with the ability switch them on and off independently up to 4.0A per 5VDC channel with independent 5VDC adjustments per channel forregular and accelerated Commodore Amiga A500, A500+, A600 and A1200. The new Amiga PSU DUO Edition is a modern, 65W strong replacement power supply unit for Commodore Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 4.0A), +12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA, TF536, TF1230. TF1260 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • Stabilized, double protected +5VDC up to 4.0A rated output (per channel)
  • Stabilized +12VDC up to 1.0A rated output (per channel)
  • Stabilized -12VDC up to 0.15A rated output (per channel)
  • Trim potentiometer for 5VDC fine adjustments (5-5.5V range) on every channel
  • Double over current protection for all output lines
  • Main AC power On/Off switch
  • Two channel On/Off switches
  • Each channel has a set of LED power good indicators (green 5VDC, yellow 12VDC, blue -12VDC).
  • Eco friendly, green design: consumes ~20% less power compared to original PSU set
  • Output cable length (1.5m) regular Amiga or CD32/A590 compatible.
  • Detachable AC cable (allowing you to use your own desired cable length).
  • Weight only 0.3 KG
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
 £ 124.99 Excl. VAT Read more
Amiga 600 Wild Weird Wicked Reproduction Box
Amiga 600 Reproduction Box – Wild Weird Wicked
PRODUCT DISCONTINUED Amiga 600 reproduction box - Wild Weird Wicked, these are brand new and designed to be used as box art or to house your Amiga A600. These are true reproductions of the original Amiga 600 boxes created by plakativ-druck.ch.
Key features:
  • Box is true to the original size and design.
  • Including "Innards" for positioning the Amiga A600 computer and accessories.
  • Laminated outside / moisture repellent.
  • Will be delivered flat in a large envelope.

We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32   Please note: This is an Amiga 600 reproduction box and NOT AN ORIGINAL.  
£ 0.00 Inc UK VAT Read more
Amiga picoPSU Adaptor
Amiga PicoPSU Adaptor – A500, A600, A1200
PRODUCT DISCONTINUED   Amiga PicoPSU Adaptor suitable for the A500/A600/A1200. The right angled connector provides a lower profile. You can operate the unit using a toggle or push to make switch. A 90W PicoPSU power supply, with a 60W mains adaptor, has been sufficient to operate an Amiga 600 and Amiga 1200 with a 040 and CD-ROM. PCB dimensions, 51x51mm Does not include any PicoPSU. Designed and built by Ian Stedman    
£ 0.00 Inc UK VAT Read more
Amiga PSU Boost A500 - A500 Plus
Commodore Amiga PSU for A600 (BOOST VERSION)
Commodore Amiga PSU for A600 BOOST VERSION, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200. The new Amiga PSU BOOST is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems. Based on our famous Amiga DUO/DUO+ PSU experiences provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or Furia accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • Commodore Amiga 500, 500+, 600, 1200 compatible
  • Stabilized & filtered 5VDC up to 8A output (peak)
  • Stabilized & filtered 12VDC up to 0.5A output
  • Stabilized & filtered -12VDC up to 0.15A output
  • 5VDC manual adjustment feature (potentiometer)
  • Factory calibrated for stock Amiga 500 reference load
  • Active & passive over voltage protections for main +5VDC line
  • Over current protection for all output lines
  • Integrates Protection & Adjustment LED Module add-on
  • Fully isolated & fused on AC side
  • Durable power On/Off switch (black)
  • Status LED (Good Status Green)
  • Long output cable (1.8m) with rectangular DIN 5-pin plug
  • Detachable input AC cable for all versions (cable included)
  • Weight only 0.4 KG (2x less than original PSU)
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
 £ 66.66 Excl. VAT Add to basket
A630 Rev 3 Amiga 600 Accelerator
A630 Rev 3 128Mb Accelerator 68030 50Mhz / FPU Amiga A600
A630 Rev 3 128Mb Accelerator for the Amiga 600 is the latest revision of the A630 modern turbo card with the classic 68030 Motorola processor running at 50Mhz and also includes an onboard FPU and has 128Mb Fast ram. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit. Full specs:
  • CPU MC68030, clocked on 50MHz.
  • FPU 68882FN40 - synchronous or asynchronous clocking
  • 128MB SDRAM Fast Ram.
  • Cooling: Passive or Active. No heatsink or fan is included, options are below.
  • PCMCIA Friendly.
 
Important Information:
 
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2   Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.  
Notes:
  • Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
  • The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be  purchased below.
  • The Oscillator will need some insulation tape put on top to stop the A630 touching it.
  • PCB Colour will vary.
  *2Mb Chip ram is strongly recommended for WHDLoad which is available here   {PCB Colour will vary)    
 £ 216.66 Excl. VAT Add to basket