Services
Showing 1–12 of 264 resultsSorted by price: high to low

Amiga A3000 Refurbished with Keyboard and Mouse
Amiga A3000 refurbished with original keyboard and mouse (pregnant version) This is an early model with Super-Kickstart.
In working order and has been recapped and tested:
Specs:
- 68030 16Mhz Processor
- 68882 FPU 16Mhz
- 2Mb Chip Ram
- 4Mb Fast Ram
- Super-kickstart 1.4
- US PSU (will include step down transformer)
- Original Super Kickstart Floppy disk
- Includes Workbench 1.3 and 2.04 disks

Refurbished Atari Falcon 030 Computer
Refurbished Atari Falcon 030
Technical Specifications- Motorola 68030 (16Mhz) CPU
- 4Mb Ram
- 3.5" 1.44mb Floppy Drive
- QWERTY Keyboard Layout
- NVRAM/RTC replacement module installed
- Clock patch module
- 14Mb Ram upgrade
- Professionally refurbished Atari Falcon inc Power lead (power cable will have correct plug depending on where its being sent).
- Recapped both motherboard and PSU.
- Full Keyboard check.
- Floppy drive read and write test.
- Sound checked.
- Video checked.
- Case and keyboard is stripped and cleaned.

Amiga A4000D Replica Motherboard FULLY BUILT
Amiga 4000D replica motherboard FULLY BUILT using 99.9% new* parts. these boards are based on the A4000 Rev B motherboard and organized by Paul Rezendes (ACILL) and the and was directly funded by the contributions of the Amiga Community.
What's included:
- Amiga A4000D Replica PCB in Black.
- 99.9% new* components (DB23 port is a recycled component).
- Includes all custom chips (new old stock).
- Fully tested, just add daughter board, CPU card, fast ram and chip ram.

Amiga 2000 Replica Motherboard FULLY BUILT
Amiga 2000 Replica Motherboard fully built with all custom chips including Buster with an option of an additional 1Mb Chip ram upgrade to take it to a total of 2Mb of chip ram which is perfect as a start for WHDLoad with a TF534 or TF536 Accelerator card. This board is a replica of the A2000 rev 6.2 motherboard reverse engineered by Floppy209.
The unit was built from both new parts and recycled parts.

BFG9060 Amiga A4000 Accelerator Full 060 FPU
BFG9060 is a new accelerator for the Amiga A4000, A3000, A3000T* and A4000T developed by Matthias Heinrichs. The card slots into the existing CPU slot on the Amiga motherboard and includes a full 68060 CPU running at 50Mhz with FPU and MMU.
- 68060 running at 50 Mhz.
- 128 MB of DMA Fast RAM.
- Temperature and voltage monitoring via I²C.
- Onboard 5V header to connect the optional CPU fan.

TF1260 A1200 Accelerator 68060 50MHz CPU/FPU/MMU
TF1260 Terriblefire A1200 Accelerator with XC68060RC50 50Mhz CPU which includes full FPU and MMU hosts 128Mb Fast Ram, IDE connector. The TF1260 is one of the best 060 accelerators you can purchase for the Amiga 1200 And is the next step up after the TF1230 A1200 Accelerator add-on we sell for those that want that large speed jump.
Full specs:
- XC68060RC50A REV1 CPU (the CPU has the MMU and FPU).
- 128 MByte of fast-ram.
- IDE Interface - Driver required - ehide.device.
- TF328 - 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 - 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF536 - 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 - 68060 Processor other specs TBC for the Amiga CD32
- TF1260 - 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 - 68030 Processor 64Mb Ram and IDE interface for the Amiga 1200
- TF4060 - 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 - Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
- Timing fix is recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
- At least Kickstart 3.1 is required - (Kickstart 3.0 is not supported)
- PCB colour will vary.

ReAmiga A1200 Refurbished Fully Built
ReAmiga A1200 Rev 1.5 Refurbishment Service built using a A1200 board the customer supplies as a donor*. The Re-Amiga A1200 is a reverse engineered board by John "Chucky" Hertell. and is a full A1200 board with some extras added which include:
- Composite Video area changed to a new decoder for improved quality.
- VGA Connector added, VGA monitor needs to support 15Khz!
- S-Video Connector for S-Video Out
- Kickstart switch built in, if you are using 27C800 Eproms. you can program one bank with one kickstart and the other bank with another.
- PCMCIA Reset fix.
- Optional IRQ7 Switch.
- Native PAL or NTSC Option (below)
- Added LED's for _RST, _KB_RST, _ODD_CIA, _EVEN_CIA and _ROMEN also to Serial TXD and RXD (from the 5V level).
- Added resistor to IDE Activity so now adapters that made IDE led always bright will be handled correctly.
- Added pads close to floppy connector for a 0Ohm resistor if you want to do the Escom floppy patch instead of a wire.
- 9 Pin Mouse Port
- Fits in your current metal shielding**
- WHITE PCB ONLY
We reserve the right to cancel and refund any deposit made if we find an issues with securing any component or costs have increased to a level where building a unit becomes unavailable.

Amiga A500 Plus Replica Motherboard Fully Built
ITEM REPLACED BY THE RAEMIXX AMIGA A500
Amiga A500 Plus motherboard is a replica PCB of the A500 Plus REV 8.1 not to be confused with the A500 ++ (A500 Plus Plus). The A500 Plus replica is a good alternative to replace your existing broken A500 Plus board using your custom chips or one that is plug and play and soaked tested with all the custom chips included.
This is a fully built A500 Plus with all the custom chips and is plug and play, simply add your own kickstart rom.
What's included?
- Amiga A500 Plus populated motherboard.
- Both bottom and top shield
- Kickstart Rom
- Screws/Hex Screws

MC68060RC50 REV 6 Genuine 68060 FPU/MMU CPU
MC68060RC50 REV 6 Genuine 68060 50Mhz processor with FPU and MMU. Perfect for any Amiga A1200 or A4000 accelerator including the TF1260 and BFG9060 for the A4000. When installing the processor in your Amiga, you will need to add the MMUlibs for 3.1 or the CPU library files if you have AmigaOS 3.2.
What's included:
1 x MC68060RC50 REV6 CPU
Video showing the CPU you will receive will be shared and WhichAmiga program will be used to confirm its revision.

Refurbished Commodore Amiga CD32
Commodore Amiga CD32 - Professionally Refurbished
Technical Specifications:- Motorola 68020 (14Mhz) CPU
- 2Mb Chip Ram
- 2 x CD-Rom Drive
- AGA Chipset
- Refurbished Amiga CD32 Unit
- CD32 Controller
- PSU (UK)
Images of the Amiga CD32 are for illustrative purposes only, each unit will show signs of age and use. If you want photos of the CD32's we have please contact us.

Refurbished Commodore Amiga 1200 Unit
Commodore Amiga 1200 - Professionally refurbished
Technical Specifications- Motorola 68020 (14Mhz) CPU
- 2Mb Chip Ram
- 3.0 Kickstart Roms
- 3.5" Floppy Drive
- UK Layout Keyboard
- Professionally refurbished Amiga 1200 Unit (excluding mouse and PSU, these are options that can be added below).


- Images of the Amiga 1200 are for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 1200 we have please contact us.
- As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload.
- Deposits are not refundable
- No software warranty or support is provided, any software included is sold as seen.

Amiga A600 Junior Motherboard Fully Built
Amiga A600 Junior motherboard, version June Bug Junior Rev 1.3.1. The Amiga A600 Junior is a reverse engineered A600 board by Róbert Tihanyi and is a full A600 board reimagind with some extras and modifications added.
A600 Junior is based on the Commodore A600 Rev 1.5 and has these enhancments:
-
Corrected PCB layout, removed “nowhere” traces.
-
Main Vcc rails stronger.
-
Informative silkscreen.
-
Values modified in audio (opamp) circuit, unior sounds better than a Rev1.5.
-
CXA2075M Video Encoder
-
DriveSelector. Like ReAmiga A1200 but it can handle all the 4 drives, DF0 to DF3. You can assign ANY DriveID to ANY physical drive.
-
R102 moved to backside. This is the “Vampore-resistor” which are the reasony why accelerator’s sockets needs to be grinded. You don’t have to grind anymore on a Jr. board.
-
HDD bay holes are now standard 3.0mm holes insted of the original oval. HDD cradles still can be used properly, but if not, you can also use them as mounting holes for accelerators. In this way, it is far more easy than on original boards.