Amiga Gotek FlashFloppy OLED Header
Amiga 1200 Gotek Drive (Flashfloppy) with Printed Mount, OLED Header
Amiga 1200 Gotek drive pre-installed with FlashFloppy, these Gotek drives are based on a more modern OpenFlops floppy emulator which provides many improvements over the original Gotek drive, these units are a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace your current 3.5" floppy drive. These are plug and play in that you simply remove your existing Amiga 1200 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200. The Amiga 1200 Gotek drive also comes with an OLED Header unit will need 4 wires passing through the vent, the end plastic boots will be supplied so you add them after you have passed them through the vent. This provides easy viewing of what game or program you wish to use. You will need a USB stick (any size) formatted as FAT32. You can add a pre-configured USB stick as an option below.
What's included:
  • OpenFlops Gotek Drive
  • 3D Printed Amiga 1200 Gotek Mount
  • OLED Display with 3D Printed Header
What is OpenFlops Gotek Drive?
OpenFlops is an Open Hardware implementation of such an emulator, inspired from the ubiquitous Gotek hardware. It is designed to run the FlashFloppy firmware, which gives it several improvements over the original Gotek: Further information on what a gotek drive is can be found here    
£35.83 Excl. VAT Add to basket
ScanPlus AGA Amiga 1200/4000D
ScanPlus AGA – Amiga 1200 and Amiga 4000D Scandoubler
ScanPlus AGA is a internal Scandoubler for the Amiga 1200 and Amiga 4000D (not Amiga 4000T or Amiga CD32). The advantage of the internal ScanPlus AGA is that it will allow you to connect to a standard VGA monitor weather that be a traditional (best) CRT experience or a flat screen monitor or TV with VGA connector. The primary PCB sits over the Lisa chip and the smaller PCB sits over the Alice chip. Output connector connects to a VGA socket which sits in a 3D printed backplate which is included (available in white or black, please note white will be sent if no note is made asking for black). ScanPlus is plug and play, no drivers or setting up required, it will work straight out of the box, all Amiga screen modes are available via the VGA connector, these include Multiscan, PAL, NTSC, DoublePAL DoubleNTSC, Euro36, Euro72, Super72. It provides smooth 50-60 Hz and up to 24 bit colour depth. What's included:
  • ScanPlus AGA (Lisa and Alice PCB's).
  • VGA breakout socket.
  • White Backplate for VGA socket (please but a note on the order to ask for Black if required instead).
  • Ribbon cable to connect to VGA socket.
  • Link cable to Alice PCB.
  • DPMS screensaver utility included - Download here
  • Item is brand new.
  • Installation guide is here


  • Not retail boxed.
  • Requires some knowledge of Amiga hardware when installing, fitting service available if required, ask for details.
Read more
Amiga A600 4Mb Fast Ram Module
Amiga A600 4Mb Fast Ram Module

This unit has been superseded with the A600 8Mb Fast Ram version which you can switch between 4Mb and 8Mb fast ram.

Amiga A600 4Mb Fast ram module provides 4Mb of fast ram in your Amiga 600 works with all revisions of mainboard and simply plugs on top of the A600 processor. The benefit of having 4Mb of fast ram is that it opens up the world of WHDLoad as the recommended minimum of fast ram is 4Mb in an OCS/ECS Amiga. It is strongly recommended that an extra 1Mb chip ram is also present (total of 2Mb chip). Each unit is hand built and tested for 24 hrs. and built to order an take approx 3 working days from order.

This unit has been superseded with the A600 8Mb Fast Ram version which you can switch between 4Mb and 8Mb fast ram.

£28.99 Excl. VAT Read more
Atari ST Gotek Grey STFM - STE
Atari ST Gotek Drive, OLED Display and FlashFloppy
Atari ST Gotek drive is a great replacement for your failing Atari ST floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Atari ST floppy drive and replace it with this unit. You will need a USB memory stick (NOT included) with your loaded .ST files. Want to know what a Atari ST Gotek drive is checkout this post It mentions Amiga but its no difference if its Amiga, Atari, Amstrad you will see the same benefits. Floppy Ribbon and Power Extender available as an option (10cm), If your existing ribbon is less than 7cm you may need the extender.    
£30.83 Excl. VAT Select options
Amiga 600 A608 Mini 8Mb Fast Ram Card
Amiga A600 8Mb Fast Ram PCMCIA switchable
Amiga A600 8Mb Fast Ram Card is PCMCIA switchable using a physical jumper to switch from 8Mb to 4Mb Perfect for WHDLoad, Its tiny size makes it the smallest 8Mb fast ram card for the Amiga 600.
  • ON/OFF - You can enable or disable the card.
  • 4Mb/8Mb jumper
PCMCIA Friendly? Benefits of a PCMCIA friendly card is that you can use the PCMCIA slot of the Amiga 600 for:
  • Transferring files from your PC/MAC using the a PCMCIA CF card adaptor
  • Plug in a Ethernet card to transfer files from a PC/MAC via FTP
  • Adding a CD Drive that has a PCMCIA interface
These cards are brand new and perfect in giving your Amiga 600 a little boost but also opens the door to running WHDLoad games. What is WHDLoad? WHDLoad is a a solution where by the user can install hundreds of Amiga games on to a HDD/CF or SD card even if the game originally did not have the option of installing the game on to the internal HDD/CF/SD card. The vast majority of games have already been converted ready to go or you can create them yourself if you have the original game on a floppy disk/s. Also many great Amiga demos have been converted for WHDLoad. It's recommended that you have 2Mb Chip ram via the trapdoor which is available here which is the perfect compliment to the Amiga A600 8Mb fast ram card.   1 Year RTB Warranty.
£38.33 Excl. VAT Add to basket
FlashFloppy Gotek OLED Display Header
Amiga 600/1200 Gotek OLED Display Header Only
*This unit is if you already have a FlashFloppy Gotek drive. The Amiga 600/1200 FlashFloppy OLED header unit is the perfect companion for the Amiga 600/1200 Gotek FlashFloppy. It allows easy viewing the current ADF file loaded on the Gotek. This requires zero hacking of your Amiga case. These units are ready built and are very easy to install. What you will receive:
  • 3D Printed Header
  • OLED Display
  • 30cm of cable from the header to the Gotek drive.
£9.99 Excl. VAT Add to basket
Amiga 1200 Case White A1200.NET
Amiga 1200 Case Brand New White
Amiga 1200 Case Brand New White from What's included?
  • Top case including enhancements
  • Bottom case including enhancements
  • Enhanced bottom trapdoor with extra vents.
  • Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
  • Rubber feet
  • Set of screws
How are these brand new?
In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 12000 case lead by Philippe Lang, the new A1200 cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.
Enhancements galore:
The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80's/early 90s and these cases take full advantage of that weather that's simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements: [accordion] [pane title="External CF Adaptor" start=open] A CF slot can be open up on the side of the A1200 case to allow easy access to what would be the CF card within the A1200 itself. [/pane] [pane title="MiST FPGA Board"] MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation. The new A1200 case has mounts to mount the MiST FPGA within the A1200 case. [/pane] [pane title="Raspberry PI"] Yes you can mount a Raspberry PI 2/3 within the new A1200 case with the use of the mounts already part of the case for a nice clean solution. [/pane] [pane title="Keyrah V2"] [caption id="attachment_18644" align="aligncenter" width="300"]Keyrah V2 Keyrah V2 for the Amiga 1200/600, C64, VIC 20 and C16[/caption] Keyrah V2 is an IO adaptor that allows you to use the original keyboards of the Commodore Amiga 600 and 1200, Commodore 64, VIC-20 and C-16 within their respective cases. The purpose of this you can then install a Raspberry PI which uses the original keyboard of that computer and providing 2 x D9 ports. The new Amiga 1200 case has mounts are located at middle top of bottom shell. This location make the keyboard adapter available for Raspberry Pi or MiST board. Original Amiga 1200 keyboard ribbon will fit nicely just at the right place on the keyboard adapter board. I/O connectors are accessible through rear panel I/O slots. [/pane] [/accordion]   So what are the differences between the original Commodore case and the New A1200 case?
  • The plastic is 100% UV proof to avoid case turning yellow over time.
  • Screw brass inserts in all 6 new screw towers for smooth operations. No more broken plastic clips!
  • Bottom trapdoor offers better cooling with extra vents and 3x rear trapdoors are available: Plain door, VGA hole, DVI hole, perfect for the Re-Amiga
  • Supports for: Raspberry Pi©, MiST© FPGA, Keyrah© V2 keyboard adapter, RapidRoad© DoubleUSB  and Lotharek© HxC Floppy emulator
£88.33 Excl. VAT Select options
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.1.4 for Amiga A1200 Official Licenced Bundle
AmigaOS 3.1.4 for Amiga A1200, this product includes:
  • 2 x Physical 3.1.4 Kickstart ROMs (HI & LO) to be installed in your real Amiga.
  • Unique AmigaOS 3.1.4 serial number (to enable you to download the official AmigaOS digital files which includes AmigaOS ADF files Workbench, Install, Storage, Fonts, Extras, Locale) and the digital 3.1.4 ROM file from the Hyperion website)
  • Official AmigaOS 3.1.4 Disk Labels (6 in total)
  • Manual
We can also offer a preloaded CF Card of your choice with or without CF IDE adaptor/Ribbon as an option below.
No 3.5" floppy disks?
No problem, getting 6 x 3.5" floppy disks that work are in short supply, however we can offer a solution, we have a selection of Gotek drives which replaces your internal 3.5" floppy drive which will enable you to use the AmigaOS ADF files easily just by putting them on a USB stick (available as an option) , Gotek drives are available here Want to know what a Gotek Drive is? Check out our guide here

What is AmigaOS 3.1.4?

The new, cleaned-up, polished Amiga operating system for your 68K machine fixes all the small annoyances that have piled up over the years. Originally intended as a bug-fix release, it also modernizes many system components previously upgraded in OS 3.9.
Contrary to its modest revision number, AmigaOS 3.1.4 is arguably as large an upgrade as OS 3.9 was, and surpasses it in stability and robustness. Over 320K of release notes cover almost every aspect of your favourite classic AmigaOS -- from bootmenu to datatypes.
Some key features:
  • Over 20 Kickstart ROM modules and many more disk-based core OS components were fixed, updated, or added.
  • Native support for all Motorola 68000-68060 CPUs, and a more robust Auto-Configuration process.
  • Support for large hard disks, including boot, for any OS 2.x/3.x-compliant controller driver supporting HD_SCSI_CMD, TD_64 and/or NSD. Dedicated boot partitions are a thing of the past, even on legacy devices. You can also use variably-sized "super floppies".
  • modernized Workbench as powerful as the OS 3.9 version, including new or refreshed Preference editors in the legacy OS 3.1-"GadTools" style. Its tools such as DiskCopy and Format fully support large media. Printer, hard disk and many other support tools have been fixed and upgraded.
  • Remember "Diskdoctor"? It earned its PhD and is now ready to reliably rescue data from your floppies or hard disks.
  • The CLI/Shell and many of its commands have been reworked and modernized, now sporting native support for pipes, softlinks, hardlinks and long filenames. New commands support running Workbench programs from the Shell or upgrading ROM modules.
  • CrossDOS and the CD-ROM filesystem are now smarter, faster, and multi-threaded, adding Rockridge and Joliet extensions as well as UDF.
  • Fully reworked, modernized and bug-fixed printer drivers include support for PCL and PostScript, along with legacy NEC and Epson printers.
  • An optional upgradeable intuition.library provides off-screen dragging of windows for native and P96 RTG screens.
  • colorful, professionally designed icon set is included, along with the traditional four-color icons.
We are proud to be an official Hyperion reseller.  
£31.66 Excl. VAT Select options
Replacement Amiga 500 PSU (Brand New)
Commodore Amiga PSU for A500 or A500 Plus
Commodore Amiga PSU for A500 or A500 Plus, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Key features:
  • Stabilized & filtered 5VDC up to 4A output (4.4A peak)
  • Stabilized & filtered 12VDC up to 2A output (2.2A peak)
  • Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
  • Carefully calibrated for Amiga 500 reference load
  • Active & passive over voltage protection for main +5VDC line
  • Over current protection for all output lines
  • Fully isolated & fused on AC side
  • Power On/Off switch
  • Long output cable (1.8m) with rectangular DIN 5-pin plug.
  • Detachable input AC cable for all versions (cable included)
  • Weight only 0.4 KG (2x less than original PSU)
  • Runs COLD!
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • Manufactured by Electroware
  • UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 500, 500+ vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).    
£41.66 Excl. VAT Add to basket
Amiga 1200 Gotek, FlashFloppy, 3D Printed Mount
Amiga 1200 Gotek Drive, Printed Mount, OLED Display and FlashFloppy
Amiga 1200 Gotek drive is a great replacement for your failing Amiga 1200 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play and come pre flashed with FlashFloppy in that you simply remove your existing floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure the Gotek drive to your Amiga. You will need a USB memory stick (NOT included) with your loaded ADF files but we offer an option for a pre-configured USB stick below.
What are ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF's are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).
What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
£30.83 Excl. VAT Select options
Amiga Gotek Drive inc Amstrad, Spectrum, Atari, IBM PC
Gotek Drive pre-flashed with FlashFloppy (Generic)
Gotek drive is a inexpensive solution to replace your Commodore Amiga floppy drive (plus many other makes of computers). These are generic units that simply replace your existing floppy drive or put in an external enclosure. The Gotek drive is pre flashed with FlashFloppy which allows it not only to work with the Commodore Amiga, but also Amstrad CPC computers*, Sinclair Spectrum*, Atari and DOS / IBM PC's* You will need a USB memory stick (NOT included) with your loaded ADF files. This Gotek drive will work with all Commodore Amiga computers including:
  • Amiga A500
  • Amiga A500 Plus
  • Amiga A600
  • Amiga A1200
  • Amiga A1000
  • Amiga A1500
  • Amiga A2000
  • Amiga A3000
  • Amiga A4000
  • Amiga 4000T
You can also choose from a selection of add-ons below which include
  • OLED Display instead of the 3 Digit Display
  • Internal Gotek Speaker to hear those floppy sounds!
  • Gotek Rotary knob for easily selecting that game, app or demo
  We also sell Amiga Gotek Drives with 3D printed mounts that fit neatly in your Amiga: Amiga A500 Internal Gotek Drive with OLED Display Amiga A500 Plus Gotek Drive with OLED Display Amiga A600 Internal Gotek Drive with OLED Display Amiga A1200 Internal Gotek Drive with OLED Display   What are gotek drives in detail? Read here What is FlashFloppy? Check out this link Want to know even more about them, checkout's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!   *Amstrad / Spectrum or computers with 3" disk drives or old PCs with 5.25" drives and such. You just need the correct floppy IDE or Ribbon connection cables NOT INCLUDED.
£27.49 Excl. VAT Select options
Amiga 1200/600/4000 IDE Header Replacement
Amiga 600/1200/4000 IDE Header Replacement
Amiga 600/1200/4000 IDE Header (Socket) Replacement This service replaces the 44pin IDE header on an Amiga 1200 with a brand new socket. Price includes FREE UK return shipping.
£16.99 Excl. VAT Add to basket