Services
Showing 241–252 of 268 resultsSorted by price: high to low
MS-DOS PC Case Badge White
MS-DOS PC Case Badge White, perfect for any PC case, add a touch of nostalgia from a great MS-DOS era in PC history. These badges are printed on high quality white vinyl finished with a gel epoxy bubble giving that classic PC badge look and feel.
MS-DOS PC Case Badge Black
MS-DOS PC Case Badge Black perfect for any PC case, add a touch of nostalgia from a great era in PC history. These badges are printed on high quality black vinyl finished with a gel epoxy bubble giving that classic PC badge look and feel.
Amiga A500 Plus Replica Motherboard Fully Built
ITEM REPLACED BY THE RAEMIXX AMIGA A500
Amiga A500 Plus motherboard is a replica PCB of the A500 Plus REV 8.1 not to be confused with the A500 ++ (A500 Plus Plus). The A500 Plus replica is a good alternative to replace your existing broken A500 Plus board using your custom chips or one that is plug and play and soaked tested with all the custom chips included.
This is a fully built A500 Plus with all the custom chips and is plug and play, simply add your own kickstart rom.
What's included?
- Amiga A500 Plus populated motherboard.
- Both bottom and top shield
- Kickstart Rom
- Screws/Hex Screws
Amiga 500 Reproduction Batman Box
LAST EVER PRODUCTION!! AFTER THESE THERE WILL BE NO MORE. SPECIAL ORDER SO NO REFUNDS
Amiga 500 Batman reproduction box, these are brand new and designed to be used as box art or to house your Amiga A500. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 500 was shipped.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 500 reproduction box and NOT AN ORIGINAL AND SOLD AS SHELF ART
Key features:
- Box is true to the original size and design.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 500 reproduction box and NOT AN ORIGINAL AND SOLD AS SHELF ART
Sum A600 USB Keyboard Adaptor
PRODUCT DISCONTINUED
Sum A600 USB Keyboard adaptor is a USB interface for HID keyboards (ONLY) without the need for installing additional AmigaOS software drivers. Device's installation procedure consists of simply attaching it the U7 chip located on A600's motherboard. Additional feature of the adapter is its "Bootloader" function allowing future firmware upgrades.
Sum A600 USB comes with dedicated configuration mode, which becomes available when you by pressing both the Right-Shift + Pause keys together. User preferences are saved to the built-in EEPROM memory.
Key Features of the Sum A600
- Support for both USB HID and USB-PS / 2 keyboards (Not gaming or LED backlit keyboards).
- A600 compatibility (U7 chip-attached).
- Built-in USB stack.
- Configuration mode for PC keyboard (activated by R-Shift + Pause key combination),
- Configuration mode for Mac keyboard (activated by R-Shift + F19 key combination).
- Built-in EEPROM memory enabling user preferences storage.
- "Bootloader" function allowing future firmware upgrades.
- "Status" indicator LED providing information about device's state.
- built around 16-bit Microchip microcontroller utilizing nanoWatt technology.
- Non-blocking keyboard A600 - You can still use the inbuilt A600 keyboard.
Entering configuration mode (R-Shift + Pause)
- F1 - RESET type - software (A2000, A3000, A4000, CD32, CDTV) or hardware (A600, A1200),
- F2 - mapped Amiga Right to Alt Right,
- F10 - view keycode (on / off),
- F12 - display configuration
| Amiga keys | USB keyboard |
|---|---|
| Amiga reset | CTRL + L-Win + R-Win CTRL + L-Alt + R-Alt CTRL + L-Alt + Del |
| Help | F12 |
| L-Amiga | L-Win |
| R-Amiga | R-Win |
Commodore 64 Replica Box (Breadbin) C64
PRODUCT DISCONTINUED
Commodore 64 Replica Box (Breadbin), these are brand new and designed to be used as box art or to house your Commodore C64 Breadbin. These are true reproductions of the original boxes.
Please note: This is an Commodore 64 C64C/C64II reproduction box and NOT AN ORIGINAL.
Key features:
- Box is true to the original size and design.
- Including "Innards" for positioning the Commodore 64 C64C/C64II computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
Please note: This is an Commodore 64 C64C/C64II reproduction box and NOT AN ORIGINAL.
Commodore 64 C64C/C64II Replica Box “T2”
Commodore 64 C64C/C64II Replica Box, these are brand new and designed to be used as box art or to house your Commodore 64C or 64II. These are true reproductions of the original boxes.
Please note: This is an Commodore 64 C64C/C64II reproduction box and NOT AN ORIGINAL.
Key features:
- Box is true to the original size and design.
- Including "Innards" for positioning the Commodore 64 C64C/C64II computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
Please note: This is an Commodore 64 C64C/C64II reproduction box and NOT AN ORIGINAL.
Commodore CDTV PSU Adaptor
PRODUCT DISCONTINUED
Commodore CDTV PSU his has been designed to allow you to replace the existing power supply inside the CDTV. You can use a regular or picoPSU ATX power supply.
Does not include any PicoPSU.or ATX PSU
Designed and built by Ian Stedman
Amiga PicoPSU Adaptor – A500, A600, A1200
PRODUCT DISCONTINUED
Amiga PicoPSU Adaptor suitable for the A500/A600/A1200. The right angled connector provides a lower profile. You can operate the unit using a toggle or push to make switch.
A 90W PicoPSU power supply, with a 60W mains adaptor, has been sufficient to operate an Amiga 600 and Amiga 1200 with a 040 and CD-ROM.
PCB dimensions, 51x51mm
Does not include any PicoPSU.
Designed and built by Ian Stedman
Amiga ATX PSU Adaptor – A1000, A2000, A3000
PRODUCT DISCONTINUED
Amiga ATX PSU Adaptor which can be used in an ATX tower case or inside an A1000, A1500, A2000, A3000 (Big Box) Amiga, this adapter provides the -5V and ‘Tick’ signal. For the A3000, the FAIL signal is available to use.
This is the highest rated power adapter available, it can safely handle the following power levels:
+5V @ 15A
+12V @ 8A
This yields a system power of 175W.
One DIP switch sets the power switch type, momentary (as used on ATX cases) or latching (as used on original power cases. The other DIP switch sets the ‘Tick’ frequency.
PCB dimensions, 68x41mm
Does not include any ATX PSU.
Designed and built by Ian Stedman
AmigaOS 3.2.1 ROM Burning Service for Amiga A3000
AmigaOS 3.2.1 ROM Burning Service for Amiga A3000, within this service we will burn the AmigaOS 3.2 Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 3000.
What you will receive:
- Physical AmigaOS 3.2.1 Kickstart HI ROM
- Physical AmigaOS 3.2.1 Kickstart LO ROM
The Process:
This service requires proof of your purchase of AmigaOS 3.2 a screenshot of a receipt will be fine. Please note ONLY customers who already bought AmigaOS 3.2 can purchase this service. If the buyer is unable to provide proof of the purchase the transaction will be canceled and funds will be refunded minus any processing fees (if Paypal was used to purchase this service).Providing Proof:
We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation using the upload tool below.
We are proud to be an official Hyperion reseller.
TF534 Accelerator for Amiga 500/2000
NO LONGER AVAILABLE - TF536 IS THE REPLACEMENT
TF534 accelerator a perfect upgrade for any Amiga A500, 500+ or A2000. Included is a ceramic Motorola 68030 CPU with an optional 68882 FPU clocked at 33mhz, 4MB of RAM, and a 2.5" IDE connector for an CF HDD Card. Full specs:- MC68030RP33B Processor
- 4MByte of fast-ram.
- 68882 FPU PLCC Socket (FPU option below)
- 44 Pin IDE connector
- Includes A500/A500+ CPU relocator
Prerequisites
- Kickstart ROM 3.1, 3.1.4, 3.2 to boot from IDE (available as an option below).
What is TerribleFire?
Well it’s not what it’s who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:- TF328 – 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 – 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF536 – 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 – 68060 Processor other specs TBC for the Amiga CD32
- TF1260 – 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 – 68030 Processor 128Mb Ram and IDE interface for the Amiga 1200
- TF4060 – 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 – Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor