Amiga A600 Keyboard Membrane
Amiga A600 Keyboard Membrane (New) BLUE

Amiga A600 Keyboard Membrane brand new BLUE. If you have issues with your Amiga A600 keyboard with missing keys or missing rows of keys the chances are the membrane needs replacing. There are 3 types of Mitsumi keyboard membrane for the Amiga A600:

This membrane is compatible ONLY with the BLUE A600 membranes, if your current A600 membrane is GREEN these are different and are available to purchase here

What if you have missing keys or rows of keys on the Keyboard? Try these possible fixes first:

  • Check the ribbon is inserted all the way in the connector on the Amiga A600 mainboard.
  • If it’s only 1 or two keys the plunger may need a clean, strip down the keyboard and clean the plunger with some IPA.
  • If it’s a whole row of keys missing its a very strong possibility that the membrane on your needs replacing.
  • The final step is to trim off 1mm of the connector (the ribbon end that plugs into the A600 mainboard).

Do let us know if any of the above fixes help you!

 

 

£24.99 Ex. VAT Read more
Refurbished Amiga A500
Refurbished Commodore Amiga 500 PLUS

Commodore Amiga 500 PLUS – Professionally refurbished

Technical Specifications

  • Motorola 68000 (7.14Mhz) CPU
  • 1Mb Chip Ram
  • 2.04 Kickstart Rom
  • 3.5″ Floppy Drive
  • UK Layout Keyboard

What’s included?

  • Professionally refurbished Amiga 500 + (PLUS) Unit (excluding mouse and PSU), these are options that can be added at the end.

 

What is Refurbished?

Each Commodore Amiga 500 + (PLUS) mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 + (PLUS) worked as it did when it first came from the factory back in the 1980’s.

Case and keyboard is stripped and cleaned but due to age may show signs of use and age.

 

What is Ultrasonic cleaning?

Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner.

An example of the results:

Amiga Motherboard Before being Recapped & Ultrasonic Cleaned

 

Refurbished Amiga Motherboard – Recapped & Ultrasonic Cleaned

Want up add some extras?

We want you to have the Amiga you always wanted, and that’s why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc. if there is something else or would like to add any mods let us know!

 

Shipping

UK shipping will be via Parcelforce and shipping cost will be calculated the checkout.

Worldwide shipping available simply contact us for a shipping quote.

 

Images of the Amiga 500 + (PLUS) is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 500 + (PLUS) we have please contact us.

 

£399.99 Ex. VAT Add to basket
Geo's Quest Box Set for the Commodore Amiga
Geo’s Quest Box Set Commodore Amiga

Geo’s Quest series is a loose parody of the Commodore story told in a humorous, satirical and absurd humorous way following the main character, George Angus. There are 9 chapters in the story of which 5 are included in the box set. (Chapter 6 “There be Cows” is currently in development and an LHA of the Chapter and PDF Chapter Manual will be sent to the purchaser upon completion – anticipated date early 2025.) This is a truly retro series developed on Amigas for Amigas. All coding, Graphics, Animations, Music, Sounds, Text, even the Manuals were developed on an A1200 and A600, in glorious 320 x 200, 32 Color Low Res. Using AMOS, Gr.A.C.2, Personal Paint, OctaMed, Amigawriter, AmiPDF and various utilities.

The entire endeavor is the work of one person Paul Golian who started in 2000, was shelved in 2002 and then 20 years later upon retirement resurrected culminating to these first 5 chapters.

Included in the Box Set you find the following:

  • Game CD with both GQ2 “In Search of Queen Lorraine” & GQ3 “Gateway to Nowhere (part 1)” in both NTSC & PAL versions (GQ2 has 1 version for both) and Game Manuals in PDF format.

  • Game SD with both GQ2 “In Search of Queen Lorraine” & GQ3 “Gateway to Nowhere (part 1)” in both NTSC & PAL versions (GQ2 has 1 version for both) and Game Manuals in PDF format.

  • Printed Color Glossy Game Manuals for both Games.

  • Printed Color Glossy Game Maps for both Games.

 

This game comes on physical media.

 

What You Need to Play

An Amiga, Emulated Amiga with 2.0 + ROM, 2MB Chip Ram with a minimum 1.65MB Free and 36MB Free Hard Drive Space for both games. It is recommended to use an accelerated Amiga (‘020 or greater) for a smoother game play experience.

 

£19.99 Ex. VAT Add to basket
A630 Rev 3 Amiga 600 Accelerator
A630 Rev 3 128Mb Accelerator 68030 50Mhz / FPU Amiga A600

A630 Rev 3 128Mb Accelerator for the Amiga 600 is the latest revision of the A630 modern turbo card with the classic 68030 Motorola processor running at 50Mhz and also includes an onboard FPU and has 128Mb Fast ram. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit.

Full specs:

  • CPU MC68030, clocked on 50MHz.
  • FPU 68882FN40 – synchronous or asynchronous clocking
  • 128MB SDRAM Fast Ram.
  • Cooling: Passive or Active. No heatsink or fan is included, options are below.
  • PCMCIA Friendly.

 

Important Information:

 

MMULib’s for the A630 Accelerator

The A630 Accelerator requires the installation of MMULib’s and it very important you use the right ones for the kickstart ROM you are using:

3.1 Kickstart:

http://main.aminet.net/util/libs/MMULib.lha
http://main.aminet.net/util/libs/MMULib.readme

3.2, 3.2.1 or 3.2.2  

Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.

 

Notes:
  • Some demos or games may require disable “CPU CACHE” for better compatibility with the MC68000.
  • The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be  purchased below.
  • The Oscillator will need some insulation tape put on top to stop the A630 touching it.
  • PCB Colour will vary.

 

*2Mb Chip ram is strongly recommended for WHDLoad which is available here

 

{PCB Colour will vary)

 

 

£216.66 Ex. VAT Read more
TF330 Amiga CD32 with TF Riser USB
TF330 CD32 Accelerator with TF CD32 Riser

NO LONGER BEING PRODUCED

TF330 CD32 accelerator a perfect upgrade for your Amiga CD32. Included is a gold top Motorola 68030 CPU clocked at 50mhz, 64MB of RAM, 2.5″ IDE connector for an CF HDD Card, RGB socket, 2 x USB HID ports.

Full specs:

  • MC68030RC50C Processor
  • 64MByte of fast-ram.
  • 44 Pin IDE connector
  • Buffered DB23 (RGB out)
  • 2 x USB HID ports with following support
    • HID Keyboard support
    • HID Mouse
    • Support for Keyboard & Mouse combo
    • Support for standard HID Gamepad :
    • In Joystick mode with 3 buttons
    • In CD32 Gamepad mode
  • RTC – M6242 emulation – (Battery as an option)
Prerequisites 
  • USB HID Keyboard/Mouse/Joypad
What are USB HID Ports?

USB human interface device is a part of the USB specification for computer peripherals: it specifies a device class (a type of computer hardware) for human interface devices such as keyboards, mice, game controllers and alphanumeric display devices.

Using USB HID Ports

  • After inserting USB HID devices (mouse, gamepad, keyboard + mouse combo) require to override the CD32 onboard game ports and are disabled and you need to use USB devices. You cannot mix and match. Override is indicated by LED2. Only a USB Keyboard can be used with the onboard CD32 game ports.

Supported USB devices:

Most standard USB HID mouse, keyboards and PC Gamepads. Some mouse with more than 3 buttons don’t work correctly, and combos with Bluetooth receivers.

What is TerribleFire?

Well it’s not what it’s who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:

 

 

£249.99 Ex. VAT Read more
Sinclair Spectrum Recapping Service
Sinclair ZX Spectrum 128k +2 +3 Recapping Service

Sinclair ZX Spectrum recapping service, the following models are covered using this service:

  • Sinclair ZX Spectrum 128K +2 +3
  • Sinclair ZX Spectrum 128K (toaster)

This is not a repair service but a maintenance service and boards should be in working order.

What’s included?

  • Check of the board before recapping is begun.
  • Removal of existing capacitors (radial capacitors).
  • Cleanup and preparation of area.
  • Replace using tier one capacitors.
  • Retest (Video, Audio)

 

Whole units can be sent (no need to send just the motherboard).

£33.33 Ex. VAT Add to basket
Amiga A1200 Black Case RetroPassion
Amiga A1200 Black Case and Mechanical Keyboard Bundle

Amiga A1200 black case and A1200.net mechanical keyboard bundle:

 

What’s included?

  • Top case including enhancements
  • Bottom case including enhancements
  • Enhanced bottom trapdoor with extra vents.
  • Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
  • Rubber feet
  • NEW A1200.net Amiga Mechanical Keyboard
  • New A1200.net black amiga keycaps

 

This bundle is perfect for:

 

So what are the differences between the original Commodore case and the New A1200 case?

  • All screws are secured with metal brass inserts. No more broken plastic clips.
  • The bottom trapdoor has extra vents for a better case air flow.
  • 2 new rear trapdoors are available to accommodate VGA and DVI. The third one is a Plain door.
  • The case supports the following modern devices : Raspberry Pi©, MiST© FPGA, Keyrah© V3 keyboard adapter, RapidRoad© Double USB and Lotharek© HxC Floppy emulator, Flashfloppy

 

Checkout this review of the prototype unit:

 

 

Image for illustrative purposes only

 

£208.33 Ex. VAT Select options
ACA1234 Amiga Accelerator
ACA1234 Amiga A1200 Accelerator 68030 128Mb Fast Ram

ACA1234 Amiga A1200 accelerator is the latest 68030 CPU based card from Individual Computers. This is far more than just another 68030 accelerator, it adds high-speed mass storage, MPAROM and many other improvements.

 

£233.33 Ex. VAT Select options
Commodore C64 C64C Case Breadbin Gray New
Commodore C64 Case (and C64c) NEW Breadbin Classic Beige

Commodore C64 case NEW (also fits C64c). If your C64 is yellowed, has signs of wear, ugly holes, or you just want to give some love to your Commodore 64, then one of these cases is right for you. You could even build a brand new C64, rehouse your existing motherboard and keyboard, or even install the Keyrah v3.

“Classic Beige” color scheme – the color used for the “breadbin” cabinets between 1982 and 1986.

Package includes:

  • Top half of case with sticker applied
  • Bottom half case without sticker
  • Two rubber stands, ten self-tapping plastic screws
  • User guide (colour printed)
  • Shipping includes outer (brown) box

 

 

£62.49 Ex. VAT Add to basket
Commodore 64 Case SX-64 Style NEW
Commodore C64 Case (and C64c) NEW SX-64 Style

Commodore C64 case NEW (also fits C64c). If your C64 is yellowed, has signs of wear, ugly holes, or you just want to give some love to your Commodore 64, then one of these cases is right for you. You could even build a brand new C64, rehouse your existing motherboard and keyboard, or even install the Keyrah v3.

“SX-64” color scheme following the look of the SX-64 portable computer with a two-tone case.

Package includes:

  • Case top half with sticker applied, Umbra grey
  • Case bottom half without sticker, metallic-look
  • Two rubber stands, ten self-tapping plastic screws
  • User guide (colour printed)

 

 

 

£62.49 Ex. VAT Add to basket
Gotek Drive Generic Large Display and Rotary Knob
Gotek Drive Pre-Flashed with FlashFloppy, a 0.96″ Display and Rotary Knob (Generic)

Gotek Drive 0.96″ Display pre-flashed with FlashFloppy for and not limited to Acorn, Amstrad, Amiga, Apple, Atari, Spectrum, DOS / IBM XT PC, MSX.

This is the latest Gotek floppy emulator for retro computers with 3.5″ floppy disk drive bay, or for use externally or in a caddy. This will also work Amstrad / Spectrum or computers with 3″ disk drives or old PCs with 5.25″ drives and such. You will require the correct floppy IDE or Ribbon connection cables and 3D printed mount. Most computers can use the ones supplied within the machine and you can do a straight swap out for the existing old floppy drive (such as in DOS PCs and Amigas) but some machines may need extra leads/connectors (such as Spectrum +3).

Flashed with current latest FlashFloppy firmware  and ready to use. Once installed, just insert a USB memory stick with your disk images/files on. Your computer will then boot from this floppy emulator or can also use it as a second drive.

Comes complete with Rotary select knob and large 0.96 OLED display screen

 

List of compatible devices:

 

Acorn Archimedes

Acorn BBC Micro

Amstrad CPC

Amstrad PCW

Amstrad PPC

Atari ST

Commodore Amiga

DEC

Dragon

IBM 3174

IBM PC

IBM PS/2

Kaypro

Memotech

MSX

NEC PC-98

Sharp

Sinclair QL

Spectrum

Tandy Color Computer

TI-99/4A

TSC Flex

UKNC, DVK

Akai

E-mu ESI-32

Ensoniq

General Music (GEM)

Korg

Kurzweil

Roland

Sequential Circuits Prophet 3000

Yamaha


KUKA

 

 

 

£44.16 Ex. VAT Add to basket
X-Surf 100 Network card for Commodore Amiga
X-Surf 100 for all Commodore Amigas with Zorro Slots

X-Surf 100 is a networking card for all Amiga computers with Zorro slots. For the Amiga A2000 or Zorro-daughterboards for the A1200, it will run at Z2 speed. If installed in an Amiga A3000, A4000 or the respective tower versions, it will run at Z3 speeds, which is up to five times faster than Z2.

Key features:

  • 100MBit physical link rate
  • Sana-II device for use with OS2.0 up to OS3.9
  • Officially supported in the Linux-m68k kernel
  • Space- and power-saving design
  • Gold plated Zorro contacts and stainless steel metal bracket
  • Local expansion port for our high-speed USB module “RapidRoad”

Drivers can be downloaded from here.

Manual here

Wiki here

Requirements:

  • TCP/IP stack such as Miami DX, AmiTCP, Genesis (included in OS3.9) or Roadshow
  • Sufficient RAM and 68020 CPU or higher
  • Kickstart/Workbench 2.0 or higher
  • File transfer method for drivers to be transferred to the Amiga

Transfer rates of over 1600kBytes/s have been measured with the X-Surf-100. Please note that the classic Amiga architecture and the current TCP/IP stacks for the Amiga don’t allow saturating a 100MBit Ethernet link. Performance in your system may be slower due to CPU performance and programs running in multitasking.

Please note that we cannot guarantee the X-Surf-100 to work in third-party Zorro boards as used in tower conversions, such as boards made by Eagle, Mikronik, RBM or Elbox. The X-Surf-100 may or may not work in these boards. Although the bus interface is designed to tolerate many mistakes that the vendors of those third-party boards have made, we can only guarantee proper operation in original Commodore daughter boards. Should the card fail to work in such a third-party board, you may have to close the Z2 jumper and downgrade to Z2 speed. For operation in Z3 computers, the Buster-11 chip is recommended. If there is only one DMA master in the Z3 system, a Buster-9 may also be used.

Owners of the Merlin graphics card must have the latest hardware patches installed. Owners of the Mediator PCI/Zorro daughterboard must close the “swap” jumper.

The X-Surf-100 is officially supported in the Linux-m68k kernel.

 

 

£120.83 Ex. VAT Add to basket