Services
Showing 97–108 of 264 resultsSorted by popularity
- You cannot add "Sega 32X for Megadrive Recapping Service" to the basket because the product is out of stock.
A3640 Accelerator Recapping Service
A3640 accelerator recapping service, all board revisions. NOTE this is NOT a repair service.
- Check of the board before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic capacitors and correcting polarity of 3 capacitors.
- Retest
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.
Amiga A4000D Replica Motherboard FULLY BUILT
Amiga 4000D replica motherboard FULLY BUILT using 99.9% new* parts. these boards are based on the A4000 Rev B motherboard and organized by Paul Rezendes (ACILL) and the and was directly funded by the contributions of the Amiga Community.
What's included:
- Amiga A4000D Replica PCB in Black.
- 99.9% new* components (DB23 port is a recycled component).
- Includes all custom chips (new old stock).
- Fully tested, just add daughter board, CPU card, fast ram and chip ram.
AmigaOS 3.2.2 A4000 ROM Burning Service for Amiga A4000
AmigaOS 3.2.2 A4000 ROM Burning Service for Amiga A4000, within this service we will burn the AmigaOS 3.2 Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 4000.
What you will receive:
- Physical AmigaOS 3.2.2 Kickstart HI ROM - 40 Pin 27C400 EPROM
- Physical AmigaOS 3.2.2 Kickstart LO ROM - 40 Pin 27C400 EPROM
The Process:
This service requires proof of your purchase of AmigaOS 3.2 a screenshot of a receipt will be fine. Please note ONLY customers who already bought AmigaOS 3.2 can purchase this service. If the buyer is unable to provide proof of the purchase the transaction will be canceled and funds will be refunded minus any processing fees (if Paypal was used to purchase this service).Providing Proof:
We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation using the upload tool below.
We are proud to be an official Hyperion reseller.
Tsunami 1230 Amiga 1200 Accelerator
PRODUCT DISCONTINUED
Tsunami 1230 Amiga 1200 Accelerator from Arananet which hosts a 68030 processor running at 42Mhz coupled with 64mb of fast ram, some say this is the spiritual successor to the classic Blizzard IV 68030 accelerator. The Tsunami 1230 Amiga 1200 is a brand new accelerator using modern 60EC030 CPU and modern ram.
The is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram add-on we sell for those that want that extra speed. 68882 PGA FPU can be added as an option below.
Full specs:
- 68EC030 QFP CPU at 42MHZ.
- 64MByte of fast-ram.
- 68882 FPU footprint ready and also selectable clock for overclocking the FPU. (FPU/Oscillator/Sockets NOT INCLUDED - OPTIONS BELOW)
- External expansion port for future upgrades (secret stuff, can’t tell)
- Clockport port (RTC only).
- Compatible with any A1200 motherboard revision.
- Fits in your old/new stock A1200 case!!!
- A1100 friendly of course!
- Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
- Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
Commodore Amiga PSU for A500 A500 Plus (BOOST VERSION)
Commodore Amiga PSU for A500 or A500 Plus BOOST VERSION, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200.
The new Amiga PSU BOOST is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems. Based on our famous Amiga DUO/DUO+ PSU experiences provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or TF536 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Commodore Amiga 500, 500+, 600, 1200 compatible
- Stabilized & filtered 5VDC up to 8A output (peak)
- Stabilized & filtered 12VDC up to 0.5A output
- Stabilized & filtered -12VDC up to 0.15A output
- 5VDC manual adjustment feature (potentiometer)
- Factory calibrated for stock Amiga 500 reference load
- Active & passive over voltage protections for main +5VDC line
- Over current protection for all output lines
- Integrates Protection & Adjustment LED Module add-on
- Fully isolated & fused on AC side
- Durable power On/Off switch (black)
- Status LED (Good Status Green)
- Long output cable (1.8m) with rectangular DIN 5-pin plug
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Amiga 1200 Case Badge – TF1260 Silver
Brand new Amiga 1200 perfect replacement for any A1200 case or for the new A1200 cases. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!
Amiga 600 / 1200 PCMCIA Socket Replacement
Amiga 600/1200 PCMCIA socket replacement service, this service replaces the PCMCIA socket, great if you have a physically broken socket or have bent or missing pins.
Amiga CD32 Laser / Lens Replacement Service
Amiga CD32 laser replacement service
Many CD32's have issues reading *compilations CD-R's and commercial CD's, With this service your CD32 will be like new with its CD laser replaced with a brand new laser. *Please note just replacing the laser does not guarantee it will play CD-R compilations, it all depends on other factors like brand of CD-R and speed of the burn also.
Amiga A1200 Keyboard with Black Keycaps
Amiga A1200 keyboard fully working with brand new black keycaps, multiple keyboard layouts available! These are perfect to give a new lease of life to any Amiga A1200 and us fully compatible with:
Professionally refurbished Amiga A1200 keyboards stripped down, cleaned and then replacement keycaps fitted and fully tested. Note the metal back plate and plastic layer will show signs of age.
We also sell the Amiga keycaps themselves and are available in UK, US, FR and DE layouts and are compatible with the Amiga A500, A600 (green membrane version), A1200 and CDTV.
[space_40]
Amiga A500 Case A500 Plus Brand New Beige
Amiga A500 A500 Plus case brand new beige case from A1200.net.
These Amiga A500 cases allow you to fit an original Amiga A500 motherboard or A500 Plus motherboard, a perfect case replacement for damaged or aged cases. However these cases are not just a tribute to a classic machine but also take into account some of the modern innovations that have been designed for these computers over the last few years!
Enhanced Design Features for Ultimate Convenience
Firstly, experience the convenience of the enhanced design features. The cases include a new right side trapdoor, allowing for easy access to HDMI using the RGB2 HDMI adaptor, USB, and Micro SD Cards. Additionally, a rear trapdoor is available for RJ45 adapters, enhancing your connectivity options. Furthermore, the cases possess robust metal threads for screws and offer extra metal threaded mounts, compatible with Raspberry Pi and Apollo V4 SA boards.
What’s Included in Your Amiga 500 Case Box
Further services:
- 1x Amiga 500 Case (Top & Bottom Shells)
- 1x Custom A500 Case badge (metal)
- 1x Bottom Trap Door with vents
- 2x Rear Trap Doors (RJ45 & Plain)
- 2x Right Side Trap Doors (I/O Ports & Plain)
- 1x Left Side Trap Door
- 4x Pads + 1x Floppy button
- 6x Screws
Further services:
- Custom Amiga 500 builds using a brand new case with upgrades installed and setup.
- FREE transplant of your existing motherboard to a brand new case as part of any A500 recapping service or A500 Plus recapping service
Amiga CD32 Capacitor Kit Polymer (Premium)
Amiga CD32 Capacitor Kit Polymer (Premium). Polymer capacitors compared to the 'standard' liquid electrolyte capacitors, organic polymer is a solid electrolyte, so these capacitors will never leak. These types are still within the Commodore specification compared to other type of capacitors that are used like tantalum or polymer tantalums which should be avoided.
We only use quality capacitors and use these in our own Amiga CD32 premium recapping service.
- Complete set of capacitors for Amiga CD32 mainboard
- Compatible with both PAL and NTSC models
- Compatible with 3,4 and 4.1 revisions
Package includes:
- Full set of SMD and through hole capacitors.
MS-DOS PC Case Badge Black
MS-DOS PC Case Badge Black perfect for any PC case, add a touch of nostalgia from a great era in PC history. These badges are printed on high quality black vinyl finished with a gel epoxy bubble giving that classic PC badge look and feel.