Services

AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.1.4 for Amiga A4000 Official Licenced Bundle
PRODUCT DISCONTINUED  AmigaOS 3.1.4 for Amiga A4000, this product includes:
  • 2 x Physical 3.1.4 Kickstart ROMs (HI & LO) to be installed in your real Amiga.
  • Unique AmigaOS 3.1.4 serial number (to enable you to download the official AmigaOS digital files which includes AmigaOS ADF files Workbench, Install, Storage, Fonts, Extras, Locale) and the digital 3.1.4 ROM file from the Hyperion website)
  • Official AmigaOS 3.1.4 Disk Labels (6 in total)
  • Manual
We can also offer a preloaded CF Card of your choice with or without CF IDE adaptor/Ribbon as an option below.
No 3.5" floppy disks?
No problem, getting 6 x 3.5" floppy disks that work are in short supply, however we can offer a solution, we have a selection of Gotek drives which replaces your internal 3.5" floppy drive which will enable you to use the AmigaOS ADF files easily just by putting them on a USB stick (available as an option) , Gotek drives are available here Want to know what a Gotek Drive is? Check out our guide here

What is AmigaOS 3.1.4?

The new, cleaned-up, polished Amiga operating system for your 68K machine fixes all the small annoyances that have piled up over the years. Originally intended as a bug-fix release, it also modernizes many system components previously upgraded in OS 3.9.
Contrary to its modest revision number, AmigaOS 3.1.4 is arguably as large an upgrade as OS 3.9 was, and surpasses it in stability and robustness. Over 320K of release notes cover almost every aspect of your favourite classic AmigaOS -- from bootmenu to datatypes.
Some key features:
  • Over 20 Kickstart ROM modules and many more disk-based core OS components were fixed, updated, or added.
  • Native support for all Motorola 68000-68060 CPUs, and a more robust Auto-Configuration process.
  • Support for large hard disks, including boot, for any OS 2.x/3.x-compliant controller driver supporting HD_SCSI_CMD, TD_64 and/or NSD. Dedicated boot partitions are a thing of the past, even on legacy devices. You can also use variably-sized "super floppies".
  • A modernized Workbench as powerful as the OS 3.9 version, including new or refreshed Preference editors in the legacy OS 3.1-"GadTools" style. Its tools such as DiskCopy and Format fully support large media. Printer, hard disk and many other support tools have been fixed and upgraded.
  • Remember "Diskdoctor"? It earned its PhD and is now ready to reliably rescue data from your floppies or hard disks.
  • The CLI/Shell and many of its commands have been reworked and modernized, now sporting native support for pipes, softlinks, hardlinks and long filenames. New commands support running Workbench programs from the Shell or upgrading ROM modules.
  • CrossDOS and the CD-ROM filesystem are now smarter, faster, and multi-threaded, adding Rockridge and Joliet extensions as well as UDF.
  • Fully reworked, modernized and bug-fixed printer drivers include support for PCL and PostScript, along with legacy NEC and Epson printers.
  • An optional upgradeable intuition.library provides off-screen dragging of windows for native and P96 RTG screens.
  • A colorful, professionally designed icon set is included, along with the traditional four-color icons.
We are proud to be an official Hyperion reseller.  
£0.00 Ex. VAT Read more
Amiga 1200/600 Gotek Drive CLEAR
Amiga 600 Gotek Drive, CLEAR/TRANSPARENT Mount, OLED Display and FlashFloppy
Amiga 600 Gotek drive is a great replacement for your failing Amiga 600 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure the Gotek drive to your Amiga. You will need a USB memory stick (NOT included) with your loaded ADF files.
What are ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF's are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).
What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
£34.99 Ex. VAT Read more
Amiga 1200 Edge Connector Replacement
Amiga 1200 Accelerator or Ram Connector Replacement
Amiga 1200 edge connector replacement service will replace a broken edge connector on a wide range of amiga 1200 accelerators or ram cards, a few examples below:
  • A1208 8Mb card
  • Any generic Amiga 1200 8Mb card
  • ACA Accelerator cards (ACA 1221, ACA 12xx, ACA 1230)
  • Apollo Accelerators
If you unsure if this service covers your accelerator just contact us here  
£16.66 Ex. VAT Add to basket
Amiga A600 Junior Motherboard
Amiga A600 Junior Motherboard Fully Built
Amiga A600 Junior motherboard, version June Bug Junior Rev 1.3.1. The Amiga A600 Junior is a reverse engineered A600 board by Róbert Tihanyi and is a full A600 board reimagind with some extras and modifications added. A600 Junior is based on the Commodore A600 Rev 1.5 and has these enhancments:
  • Corrected PCB layout, removed “nowhere” traces.
  • Main Vcc rails stronger.
  • Informative silkscreen. 
  • Values modified in audio (opamp) circuit, unior sounds better than a Rev1.5.
  • CXA2075M Video Encoder
  • DriveSelector. Like ReAmiga A1200 but it can handle all the 4 drives, DF0 to DF3. You can assign ANY DriveID to ANY physical drive.
  • R102 moved to backside. This is the “Vampore-resistor” which are the reasony why accelerator’s sockets needs to be grinded. You don’t have to grind anymore on a Jr. board.
  • HDD bay holes are now standard 3.0mm holes insted of the original oval. HDD cradles still can be used properly, but if not, you can also use them as mounting holes for accelerators. In this way, it is far more easy than on original boards.
  Motherboard PCB, passive compoents arfe new, however the custom chips a some of the ports are recycled   ** A600 Junior board does not come with any metal shielding. or kickstart rom.   3 Month RTB Warranty.    
£429.99 Ex. VAT Add to basket
ACA1221LC Amiga A1200 Accelerator
ACA1221LC 16Mb 68EC020 26.67Mhz Accelerator Amiga A1200
ACA1221LC accelerator Amiga A1200 and ACA500Plus comes with the 68EC020 processor (guaranteed to run at 26.67MHz) and 16MBytes physical memory. 11.2MBytes of this physical memory can be used as fastmem, and 1 MByte is reserved for a fast copy of the Kickstart ROM. The CPU speed can be switched in four steps between 14MHz and 40MHz. Overclocking the card beyond 26.67MHz will require active cooling and a very good power supply like the A1200 Boost PSU or the highly specced CA-PSU ; operation at this high speed is not guaranteed. The ACA1221lc features iComps IDE speeder technology that accelerates reading from the internal IDE port, this IDE speeder does not require opening the computer or even removing chips from their socket. The IDE speedup to PIO mode 3 is activated with a software setting and reaches a raw data transfer rate of 10.2 MBytes per second, which results in every-day performance of 3.6MBytes/s with fast CF cards. Fast hard drives with cache may exceed 7MBytes/s performance. The IDE speeder feature is not available if connected to an ACA500 or ACA500plus. The ACA1221lc is prepared for use with our forthcoming ACA2000, where it will provide up to 11.9MBytes of fastmem. More memory configurations allow for using Zorro cards without conflicts.   ACATool is required to unlock some of the features like:
  • MapROM - Load up other kickstart roms like AmigaOS 3.2 without the need of physical ROMS
  • Loading of the onboard Kickstart ROM file without losing valuable RAM
  • Control the IDE speeder,
And much more!  
 
£124.99 Ex. VAT Add to basket
X-Surf 100 Network card for Commodore Amiga
X-Surf 100 for all Commodore Amigas with Zorro Slots
X-Surf 100 is a networking card for all Amiga computers with Zorro slots. For the Amiga A2000 or Zorro-daughterboards for the A1200, it will run at Z2 speed. If installed in an Amiga A3000, A4000 or the respective tower versions, it will run at Z3 speeds, which is up to five times faster than Z2. Key features:
  • 100MBit physical link rate
  • Sana-II device for use with OS2.0 up to OS3.9
  • Officially supported in the Linux-m68k kernel
  • Space- and power-saving design
  • Gold plated Zorro contacts and stainless steel metal bracket
  • Local expansion port for our high-speed USB module "RapidRoad"
Drivers can be downloaded from here. Manual here Wiki here Requirements:
  • TCP/IP stack such as Miami DX, AmiTCP, Genesis (included in OS3.9) or Roadshow
  • Sufficient RAM and 68020 CPU or higher
  • Kickstart/Workbench 2.0 or higher
  • File transfer method for drivers to be transferred to the Amiga
Transfer rates of over 1600kBytes/s have been measured with the X-Surf-100. Please note that the classic Amiga architecture and the current TCP/IP stacks for the Amiga don't allow saturating a 100MBit Ethernet link. Performance in your system may be slower due to CPU performance and programs running in multitasking. Please note that we cannot guarantee the X-Surf-100 to work in third-party Zorro boards as used in tower conversions, such as boards made by Eagle, Mikronik, RBM or Elbox. The X-Surf-100 may or may not work in these boards. Although the bus interface is designed to tolerate many mistakes that the vendors of those third-party boards have made, we can only guarantee proper operation in original Commodore daughter boards. Should the card fail to work in such a third-party board, you may have to close the Z2 jumper and downgrade to Z2 speed. For operation in Z3 computers, the Buster-11 chip is recommended. If there is only one DMA master in the Z3 system, a Buster-9 may also be used. Owners of the Merlin graphics card must have the latest hardware patches installed. Owners of the Mediator PCI/Zorro daughterboard must close the "swap" jumper. The X-Surf-100 is officially supported in the Linux-m68k kernel.    
£116.66 Ex. VAT Add to basket
MC68060RC50 REV 6 CPU Processor Amiga
MC68060RC50 REV 6 Genuine 68060 FPU/MMU CPU
MC68060RC50 REV 6 Genuine 68060 50Mhz processor with FPU and MMU. Perfect for any Amiga A1200 or A4000 accelerator including the TF1260 and BFG9060 for the A4000. When installing the processor in your Amiga, you will need to add the MMUlibs for 3.1 or the CPU library files if you have AmigaOS 3.2.   What's included: 1 x MC68060RC50 REV6 CPU   Video showing the CPU you will receive will be shared and WhichAmiga program will be used to confirm its revision.
£416.66 Ex. VAT Read more
Sega Saturn & Hitachi Hi-Saturn Recapping Service
Sega Saturn Recapping Service inc Hitachi Hi-Saturn
Sega Saturn and Hitachi Hi-Saturn motherboard recapping service. All board revisions for both Saturn and Hi-Saturn.   The service includes:
  • Testing of Sega Saturn/Hitachi Hi-Saturn
  • Removal of through hole and SMD Capacitors
  • Any leakage cleaned up and prepped.
  • Replacement Electrolytic capacitors like for like
  • Final testing
  Note this is not a repair service, recapping is a good preventative measure.
£37.49 Ex. VAT Read more
MEDIATOR PCI 1200 TX+ BLACK
Elbox Mediator PCI 1200 TX+ BLACK
Elbox Mediator PCI 1200 TX+ busboard is designed to enable the expansion of towered Amiga 1200 with a wide range of high-performance, low-cost PCI cards. New firmware embedded in CPLDs of MEDIATOR 1200 TX allows significant speed-up of graphic card operations when hardware 2D and 3D acceleration is used in single-processor systems (68k or PPC).   Features: - 6 PCI slots (PCI 2.2 compatible) - Power Management Interface - 66/33MHz PCI clock (transfer rate up to 264MB/s) - 32-bit PCI datapath - 4GB PCI memory space - Busmastering/DMA in all PCI slots - SDRAM/SGRAM of PCI gfx card as a fast DMA buffer - Interrupt controller (4 lines to each PCI card) - AT and ATX PSU connectors - Compatibility with 68030/040/060 and PPC turbo cards - Fits in any A1200 in D-BOX, E/BOX (Power, Winner), EZ-Z4 and Infinitiv tower   Software: - 2D graphic drivers for: Radeon 9200, Voodoo5, Voodoo4, Voodoo3, Voodoo Banshee, - S3 Virge and S3 Virge DX PCI graphic cards - Warp 3D drivers working with Voodoo5, Voodoo4 and Voodoo3 graphic cards - TV tuner drivers for: most of available PCI TV tuners (over 100 models supported) - AHI sound drivers for: Sound Blaster 4.1 Digital, Sound Blaster 128 and - ForteMedia FM801-based sound cards (e.g. Terratec 512i Digital) - USB drivers for the Poseidon stack for: Spider and Spider II USB 2.0 cards - Network Sana-2 drivers for: Fast Ethernet 100Mbps PCI cards - Network Sana-2 drivers for: Ethernet 10Mbps PCI cards Current info about supported PCI cards is available in the Mediator Driver Guide. Package contents: - Mediator PCI 1200 TX black busboard - Mediator Multimedia CD - User's Manual   We can also supply the Elbox BlackBOX 1200 Tower case    
£266.66 Ex. VAT Read more
A1200 FPU Onboard Mod
A1200 FPU Upgrade (Onboard)
A1200 FPU upgrade (onboard) which includes socket, FPU and installation.
What does the modification do?
This FPU modification adds a real FPU to the A1200 motherboard, there has always been a place (U0) for an onboard FPU but it was never added. This is a perfect compliment for a stock A1200 or one with an accelerator without an FPU option, for example The TF1230 or any standard ram upgrade like the 11Mb Fast Ram upgrade. However there are a couple of limitations of adding an onboard FPU.
  • The FPU will be using the CPU clock which is at 14Mhz, which means the FPU will be running at 14Mhz
  • The FPU will be disabled if you use a 040 or 060 accelerator, for example TF1260. This is because both the 040 and 060 processors do not acknowledge external FPUs as you can get those processors with built in FPUs.
This modification is available as an option on our A1200 recapping service, ReAmiga 1200 and Refurbished units. Checkout this Youtube video by Chris Edwards   Process of ordering: Like our recapping service, you would need to send us your A1200 motherboard only. Once you have ordered you will receive an automated email with where to send the board and how to pack it.   [space_40]
£16.66 Ex. VAT Add to basket
Sum A600 USB Keyboard
Sum A600 USB Keyboard Adaptor
PRODUCT DISCONTINUED
Sum A600 USB Keyboard adaptor is a USB interface for HID keyboards (ONLY) without the need for installing additional AmigaOS software drivers. Device's installation procedure consists of simply attaching it the U7 chip located on A600's motherboard. Additional feature of the adapter is its "Bootloader" function allowing future firmware upgrades.
Sum A600 USB comes with dedicated configuration mode, which becomes available when you by pressing both the  Right-Shift + Pause keys together. User preferences are saved to the built-in EEPROM memory.
Key Features of the Sum A600
  • Support for both USB HID and USB-PS / 2 keyboards (Not gaming or LED backlit keyboards).
  • A600 compatibility (U7 chip-attached).
  • Built-in USB stack.
  • Configuration mode for PC keyboard (activated by R-Shift + Pause key combination),
  • Configuration mode for Mac keyboard (activated by R-Shift + F19 key combination).
  • Built-in EEPROM memory enabling user preferences storage.
  • "Bootloader" function allowing future firmware upgrades.
  • "Status" indicator LED providing information about device's state.
  • built around 16-bit Microchip microcontroller utilizing nanoWatt technology.
  • Non-blocking keyboard A600 - You can still use the inbuilt A600 keyboard.
Entering configuration mode (R-Shift + Pause)
  • F1 - RESET type - software (A2000, A3000, A4000, CD32, CDTV) or hardware (A600, A1200),
  • F2 - mapped Amiga Right to Alt Right,
  • F10 - view keycode (on / off),
  • F12 - display configuration
 
Amiga keys USB keyboard
Amiga reset CTRL + L-Win + R-Win CTRL + L-Alt + R-Alt CTRL + L-Alt + Del
Help F12
L-Amiga L-Win
R-Amiga R-Win
[space_40]  
£0.00 Ex. VAT Read more
Amiga A500 Custom Black & White
Refurbished Commodore Amiga 500 Custom

Commodore Amiga A500 – Professionally Refurbished White Edition

Technical Specifications
  • Motorola 68000 (7.14Mhz) CPU.
  • 1Mb Ram (512k slow, 512k fast).
  • 1.3 Kickstart Rom.
  • Internal Gotek Drive with side OLED display
What’s included?
  • Professionally refurbished Amiga A500 Unit (excluding mouse and PSU), these are options that can be added.
  • Brand new A500 Case White
  • Brand new A1200.NET Keycaps (NOT Stickers) Black with a choice of UK/US/DE/FR Layouts
What is Refurbished? Each Commodore Amiga A500 mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 worked as it did when it first came from the factory back in the 1980’s.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results: [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption] Want to add some upgrades? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.   Worldwide shipping available simply contact us for a shipping quote.    Buildtime 4-6 weeks (Keycaps are on thier way to us).  
£399.99 Ex. VAT Select options